|
4 P cs Aluminum Car Wheel Hub Cover Label Car Parts 64 MM Badge
There are three factors to consider when choosing a hub.
The size
Don't blindly increase the hub.Someone in order to improve the
performance and increase the wheel hub, on the basis of the tire
diameter, big boss is bound to cooperate with wide and flat tires,
car lateral swing is small and stability was improved, like a
dragonfly water when cornering, lightsome.However, the flatter the
tire, the thinner the thickness, the worse the shock performance
and the greater sacrifice of comfort.In addition, with a little
rock and other roadblocks, tires can easily be damaged.Therefore,
the cost of blindly enlarging the hub cannot be ignored.Generally
speaking, according to the original wheel hub size one or two is
most appropriate.
Three is apart from the
This means that you can't pick your favorite shape when you choose,
and you should listen to the technician's advice to consider
whether the three is appropriate.
Note:
1. If you are from Russian Federation, please leave a full name as the receiver name. Otherwise, you may not receive your items because of the regulation of your customs.
2. If you are from Saudi Arabia, please send the copy of your ID card. According to rule of Saudi Arabia, ID card is a must to do customs clearance.
Feature:
Name :Wheel Hub Cover | Material: Aluminum |
Color:Blue and Red | Place of Origin:China |
Brand:BMW and H | Term of Trade:E X W(Guangzhou) |
The basic parameters
A hub includes many parameters, and each parameter affects the use
of the vehicle, so make sure these parameters are validated before
refitting and maintaining the hub.
Make way
There are three kinds of manufacturing methods of aluminum alloy
wheel hub: gravity casting, forging and low pressure precision
casting.
1. Gravity casting method USES gravity to cast aluminum alloy
solution into the mold, and then it can be finished by grinding
with lathe.The manufacturing process is simple, without precise
casting process, low cost and high production efficiency, but it is
easy to produce bubbles (sand eye), uneven density and not enough
surface smoothness.One of geely's many models is the production of
the wheel hub, mainly early production, and new models have been
replaced with new ones.
2. One thousand tons of press forging method of the whole piece of
aluminum ingots by direct extrusion on mould, benefit is uniform
density, surface smooth and detailed, wheel hub wall thin and light
weight, strength of materials, the highest three than casting
methods as above, but due to more sophisticated production
equipment, and yield is only 5 to sixty percent, the manufacturing
cost is higher.
3. The low pressure precision casting method in precision casting
under low pressure of 0.1 Mpa, this way of casting of good
formability, outline clear, uniform density, the surface is bright
and clean, can not only achieve high strength, lightweight, and can
control the cost, and the yield over ninety percent, is the
mainstream of high quality aluminum alloy wheel hub manufacturing
methods.
Feedback:
1.Positive Feedback is very important to us.if you are satisfied with our service, please remeber to give a positive feedback.
2.Please contact us before leaving neutral or negative feedback,we will try our best to solve the problems.
3.If you are not satisfied with our best to solve the problems,please contanct us before leaving your feedback and we will resolve the issue immediately.thank you very much.
Competitive Advantage:
![]() |
High Performance Auto Exterior Accessories , Blue Metal Emblem Rim Center Caps Images |
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们
Copyright © 2009 - 2018 bjjsgy.com. All rights reserved.