Auto Accessorize Pedals Aluminum Pedal Plate W 166 X 164 X 166 /251
ML 320 ML 350
First loosen the screw, but do not remove the back nut, install the
pedal liner in the appropriate position of the far pedal.All the
brackets are turned inside, tighten the screws in the diagonal
order. The foot steps on the pad, making sure that the installed
parts are not loose.It is important to note that you can only
operate when the car is stationary and completely flameout.
Hidden trouble processing
In case of a new car, you have a problem with the gas pedal.You
don't panic, according to the professional proposed (in fact, only
this one is probably the most reasonable solution), hard on the
brake pedal, the car stopped after flameout, contact.
Material:High Quality Light Weight Polished Aluminum
Improve overall driving experience.
Heavy duty brushed aluminum construction with non-slip studs on the
pedal surface preventing from slipping-off.
Easy to install. Professional assistance is recommended.
|Name:Car Pedal Replacement||Material:Aluminum|
|Color:Polish||Place of Origin:China|
|Brand:JR||Term of Trade:E X W(Guangzhou)|
- Item Type: Pedals
- Item Width: 12cm
- For Vehicle Brands/Model: Lexus
- Material Type: Aluminium Alloy
- Item Height: 0.5cm
- Year: 2009
- Special Features: Non-slip
- Car Make: lexus GS300 GS350 GS430 GS460 2006-2009
- External Testing Certification: ISO9001
- Item Length: 32cm-35cm
- GS350-Year: 2009
- Item Weight: 0.8kg-1kg
- Logo design: words and car logo
This is a Replacement Part for your Foot pedal ,it can enhance the
performing and make it brilliant as well as they used to.
This pedals with Logo ,if you want to see the pictures with logo
pls contact seller feel free.
M-Class W164 W166 2006-2013, ML300/ML350/ML450/ML500/ML550/ML63
AMG, with Automatic transmission models.
GL-Class X164 X166 2006-2013, GL350/GL450/GL500/GL550, with
Automatic transmission models.
R-Class W251 2006-2013, R300/R350/R500/R63 AMG with Automatic
X164 GL-Class GL320CDI Bluetec Diesel, GL350, GL450, & GL550
with Automatic transmission models.
X166 GL-Class GL320CDI Bluetec Diesel, GL350, GL450, & GL550
with Automatic transmission models.
Pls check below car model list.
The correct manipulation
The throttle of a car engine is usually controlled by the pedal,
also known as the accelerator pedal, which is a device that
controls the oil supply.
The throttle pedal should be operated with the right heel on the
cab floor as a fulcrum, the foot on the accelerator pedal, with the
stretch of the ankle, step down or relax.When stepping on the gas
pedal, it should be gentle and easy to lift.
When starting the engine, the gas pedal should not step on the
bottom, slightly higher than the idle accelerator is good.At the
beginning, the fuel should be a little bit before the clutch
linkage point.Loosen the clutch to work closely with the
accelerator, the movement is quick.
In operation, the throttle should be enlarged or reduced according
to the road conditions and actual needs.The selection should be
appropriate to enable the engine to run most of the time at the
medium speed and the larger throttle valve to save fuel.Add empty
oil, clutch and pedal to coordinate when changing gear.
When the car is uphill, must not step dead gas pedal, with low
speed gear, the gas pedal should take the next half to be
appropriate.When the car runs up the slope, the accelerator pedal
must not be pedaling to the end.If the accelerator pedal takes down
three quarters of the car and the engine still cannot increase the
speed, it should be replaced with a lower level and then push the
accelerator pedal to accelerate.
Before the car stops, the gas pedal should be loosened and the gas
pedal should not be slammed.
Main point: gently tread softly, straight acceleration, gentle, not
urgent, tiptoe, not to shake.
High quality and Durable
If you need buy other products,use the "add to car" button becasuse
with your purchase of several commodities,combined postage discount
will save you much expense.